Refinishing wood floors can be expensive and time consuming, but it’s something that needs to be done. There are several steps you need to know before refinishing hardwood floors. Generally, you must know what you are doing before you do it.
Sanding is often one of the main things people do when they refinish a hardwood floor. However, if you do a little research, you will find that the sandpaper ruins the characteristics of the floor. If you think logically, when you sand the wood floor, you naturally lose some wood chips. This means that the floor becomes thinner. Another disadvantage is the fact that the sand can make a big mess and potentially leave wood chips on the ground. This makes finishing a lot more difficult. Another question to ask yourself is: How much does it cost to refinish hardwood floors?
You really should avoid sanding at all costs if you really want to take care of your floor, but what other alternatives are out there? Well, there are some that are just as profitable but cause no mess and they are extremely easy to do!
First, you must do as much repairs as you need on the ground. Over time, hardwood floors can chip and so you may need to repair or replace parts of it completely. If you need to replace the whole floor, you should try to get the exact same floor if possible. Thus, it will not look weird when you install it. It may seem obvious, but some people put the wrong floor in. Not only does it look bad, but it’s a waste of money too.
After replacing the wood in the area, the next step is to chemically refurnish the old floor with a mild tri-sodium phosphate. Be careful not to walk on the new floor. When you’ve covered the whole area, you must leave it for one day and then you will need to use a cleaner wax. Use this only on the older sections of the wood and then leave it for a few more days.
In general, it takes time to refinish wood floors, but it can be done quickly if you know how to do it. It is quite easy to do too. Just make sure to gather all the materials you need before you begin.